Any Corpus Christi TX homeowner has every right to believe corrugated and standing seam metal roofs will protect their homes from leaks and outside elements for the longest time. However, it isn't just the base material that does all this. The smallest metal roof construction details contribute greatly to its lifespan, durability, and long-term performance.
If your planning to install your metal roof by yourself or with a licensed and exceptionally-trained and experienced Corpus Christi TX roofing team, it pays to know the metal roof construction details you'll need to address before, during, and after construction. In doing so, you can guarantee the long-term performance of your roofing material that can last for 50-70 years.
How to Prepare For Your Metal Roof Construction
A roof is only as good as its roof sheathing or decking. In addition, every roof can only carry so much weight. Roof deck inspections are just one of the simplest yet most important metal roof construction details professional roofing contractors observe.
Diving further into metal roof installation preparation methods, contractors look at penetration points, flashing points, and roof access among other things. These make sure they can secure footing even with harnesses and help them identify potential problem areas.
Sheffield Metals has an excellent list of almost everything contractors observe about your metal roof prior to installation:
Metal Roofing Consultations
Before any installation occurs, you’ll be going through the process of finding the best metal roofing contractors and ultimately choosing the best metal roofing bid for you. During these consultations with contractors, expect the following:
A site inspection by the contractor to look at:
- Penetration points
- Flashing zones
- Low spots
- Differing roof planes
- Gutters
- Roof access
- Surrounding landscape
- Potential problem areas
All perimeters and “change of plain” such as transitions, valleys, backs and sides of chimneys, etc.
- Field measurement to determine the exact size of your roof.
- Sitting down with the contractor to give you options of:
- Panel choices
- Metal material choices
- Colors and finishes
- Profiles
Accessories
- Add-ons – Such as skylights, daylighting, solar panels, snow retention systems, etc.
- Maintenance – Preventative maintenance is highly suggested to get the most out of your investment
- Warranties and if they are an additional cost (Continued)
DIY Metal Roofing Basics for The Uninitiated
Now that you know the metal roof construction details and preparation needed before the actual work, here are the steps professional roofers take to make sure they install your roof in the best way possible. A homeowner with prior DIY roofing experience may get these steps down without difficulty, but in doing so, the risk of improper installation is still highly likely.
Storm Pros has a great DIY metal roof installation instruction you can use below. Check it out.
Measure Your Roof
Architects perform precision measurements and undergo several revisions before they have a final draft of any work. In the same vein, you must have an accurate picture of your roof’s dimensions. It is an essential part on how to roof a house with metal roofing.
Here are the important roof areas to measure:
Roof Slope: Almost all Allen TX residential properties have a high-slope roofing style. Measure it according to the height of your roof ridge over the edges or gutter area.
Roof Area: You can calculate this by measuring the length and width of your roof and multiplying it by the slope. The figure you get is the total square feet of materials and area you need to cover.
Prepare The Work Area
Most DIY homeowners forget to secure damage prone areas around their property, which is an essential step on how to roof a house with metal roofing.
Set tarpaulins along your front yard and your roof’s surrounding ground area. Next, position a large garbage can or dedicated tarpaulin to contain all waste materials from the roof tear off process.
Prepare a place for your tools. Additionally, wear a tool belt and make sure your scaffolding is at the same height as your roof. Have a ladder handy on the area opposite of your scaffolding.
Tear Off Your Old Roof
Before you can practice how to roof a house with metal roofing, you’ll need to remove your old one carefully. To do this, you’ll need a pry bar, hammer, and gloves. (Continued)
Why Leave Your Metal Roof Construction Details and Work to The Pros
We mentioned using only roofing contractors even if you have prior DIY metal roof experience. While experienced homeowners can go up their roof, gain good footing, and proceed with every small detail of their roof construction, most homeowners might find it difficult.
In addition, most DIY roofers find passion in learning roofing skills. Doing DIY just to save money will yield the opposite. Buying top-quality roofing equipment that you might only use once or twice isn't exactly saving money. In fact, you're spending more time in installing your roof when pros can finish it in less than a week.
Lastly, even experienced DIY homeowners can injure themselves during their roof installation process. It pays to be on the safe side. In fact, it can save you more time and money in doing so.
When it comes to metal roof construction details and exemplary roofing in Corpus Christi TX, don't hesitate to call upon Galvan Builders to help you. With our decades of experience providing exceptional roofing in our local area, we can only guarantee the best results in every project. Contact us today!
Original Post Here: Everything Corpus Christi TX Homeowners Have to Know About Metal Roof Construction Details
Galvan Builders Construction Company
4938 Williams Drive,
Corpus Christi TX 78411
361-857-4341
https://goo.gl/maps/hRuKHVsqsXXBvgRK8
No comments:
Post a Comment